Fleece Fabric • Sew Fleece • Fleece Clothing
Today's fleece fabric is a high-tech, high performance product that is very easy to sew because it's
extremely forgiving. Fleece is extremely warm and soft to the touch. It wicks away moisture from the body, so
it feels dry, even when soaking wet. Fleece offers tremendous warmth in comparison to its weight and offers
high fashion colors, textures, and designs.
Construction
Fleece fabric is made by first twisting fibers into yarn. The yarn is then knitted into fabric. To raise
the fibers and create a downy surface, the fabric is brushed with wire brushes. This process makes the cloth
compact. Finally the fleece is then sheared and finished.
Fiber Content
Fleece fabric is predominantly made from 100% polyester. However, it can be blended with other materials
such as spandex, cotton, wool, and rayon.
Warmth Per Weight
Fleece is first spun into a yarn which adds weight. It is then brushed to compact the fabric and to build
air pockets for insulation. Fleece offers more wind resistance per weight.
Wicking
Also referred to as moisture management, wicking is equivalent to capillary action in material. The fabric
is constructed in such a way to allow the moisture to travel along the fibers, or yarns, away from the body.
This chemical application is found only on the lighter weight fleeces because they are worn next to the body.
Water Repellency
Polyester and acrylic fibers are hydrophobic by nature. This means that they retain little water. With the
technology of microfibers (fine denier yarns), these fabrics repel water by construction. Durable Water
Repellent or DWR, a semi-permanent substance, is applied to the surface of some mid-weight and heavy weight
fleeces to further repel moisture.
Upkeep
A clever trick to freshen up a fleece garment is the brush on the end of a travel steamer. Don't use the
steam - just the brush.
Pilling
Many of today's fleeces claim "no pilling." However, a more accurate claim would be "low pilling."
Pilling is the formation of little balls of fiber on the surface of the fabric. These balls result from
contact, abrasion, and wear. As fabric rubs against fabric, fiber is pulled away from the yarn and raises to
the surface of the fabric. This occurs in all fabrics and cannot be avoided. Pills are not as noticeable on
natural fabrics because the fibers are not as strong as synthetic fibers. When pills rise to the surface on
natural fabrics, they break and fall off.
Manmade fibers such as polyester and acrylic are very strong. When the fiber pills on the surface of these
fabrics, the manmade fiber is so strong that it won't release the pill.
The fleece of yesteryear was notorious for pilling. Hanging on the rack in the stores, the garments looked
as though they had been through war. Today's technology has assisted in the production of many very low pill
fabrics. With the introduction of microfibers and the newer finishing techniques, high quality fleece now has
a low-pill finish that looks excellent after wearing and laundering.
Finishes
The surface appearance of fleece fabric is a direct result of shearing and finishing techniques. Shearing
is a finishing process done by a machine similar to a lawn mower. Shearing controls the length of the pile or
nap, and depending upon the techniques used, may create a patterned or smooth surface. A sculptured effect is
achieved by flattening portions of the pile with an engraved roller and shearing the remaining areas.
Berber Fleece has a softly curled, nubby surface that is distinguished by a flecked appearance, resulting
from a combination of fibers. It generally has a soft sweater-knit backing.
Shearling and Sherpa have a lamb's wool appearance that is achieved by curling the pile or surface nap.
Plush Fleece has a velvet-like appearance resulting from dense fibers that are evenly sheared.